transfig323 stable port information

Package: transfig323
Version: 3.2.3d
Revision: 4
Depends: x11, libjpeg-bin, libpng3-shlibs, libtiff-bin, netpbm-bin
BuildDepends: libjpeg (>= 6b-3), xaw3d-static, libpng3, libtiff (>= 3.5.7-5), netpbm (>= 9.24-2), x11-dev, fink (>= 0.24.12), xmkmf (>= 1.0.2-3)
Conflicts: transfig
#Source: http://www.xfig.org/xfigdist/transfig.%v.tar.gz
Source: mirror:sourceforge:fink/direct_download/source/transfig.%v.tar.gz
Source-MD5: 4fbf4184fe2df4fe9bb5130b6e19907c
PatchFile: %n.patch
PatchFile-MD5: 11cc79ac55d8203be9d2733964299481
CompileScript: <<
#!/bin/sh -ev
export PATH=%p/lib/xmkmf/bin:$PATH
export IMAKEINCLUDE=-I%p/lib/X11/config
xmkmf
make Makefiles
make PREFIX=%p CC=cc
<<
InstallScript: <<
#!/bin/sh -ev
export PATH=%p/lib/xmkmf/bin:$PATH
export IMAKEINCLUDE=-I%p/lib/X11/config
make install PREFIX=%p DESTDIR=%d BINDIR=%p/bin INSTALLFLAGS=-c
make install.man PREFIX=%p DESTDIR=%d MANPATH=%p/share/man DOCDIR=%p/share/doc/transfig INSTALLFLAGS=-c
<<
DocFiles: CHANGES LATEX.AND.XFIG NOTES README
License: BSD
Description: Converts xfig objs to various graphics formats (old version)
DescPort: We don't need xpm since it is already in XFree86 4.1
DescPackaging: <<
Compiled with LaTeX 2e options chosen rather than LaTeX
2.09. XFIGLIBDIR was set to %p/share/xfig (as in xfig).
<<
DescUsage: <<
This package is automatically called by xfig, although it is
also possible to invoke "fig2dev" directly from the command line.
<<
Homepage: http://www.xfig.org/
Maintainer: Dave Morrison

transfig323 stable port .patch

diff -ruN transfig.3.2.3d/fig2dev/Imakefile transfig.3.2.3d-patched/fig2dev/Imakefile
--- transfig.3.2.3d/fig2dev/Imakefile 2001-04-19 13:19:38.000000000 -0400
+++ transfig.3.2.3d-patched/fig2dev/Imakefile 2005-04-02 18:59:27.000000000 -0500
@@ -28,13 +28,13 @@
XCOMM You should point XFIGLIBDIR to the same directory you did when you compiled
XCOMM and installed xfig. This will be made automatic in the future.

-XFIGLIBDIR = /usr/local/lib/X11/xfig
+XFIGLIBDIR = $(PREFIX)/share/xfig

XCOMM ******
XCOMM If your system has the strerror() function (doesn't have sys_errlist) then
XCOMM comment out NEED_STRERROR with an XCOMM comment.

-NEED_STRERROR = -DNEED_STRERROR
+XCOMM NEED_STRERROR = -DNEED_STRERROR

XCOMM The following probably only applies to Windows 9x/NT:
XCOMM If your system can open files in text and binary modes and has the
@@ -65,8 +65,8 @@
#define USEPNG

#ifdef USEPNG
-PNGLIBDIR = $(USRLIBDIR)
-PNGINC = -I/usr/include/X11
+PNGLIBDIR = $(PREFIX)/lib
+PNGINC = -I$(PREFIX)/include
#endif

XCOMM ****************
@@ -78,11 +78,11 @@
XCOMM Change XPMINC if necessary to point to the include file for xpm (xpm.h)
XCOMM

-XCOMM #define USEXPM
+#define USEXPM

#ifdef USEXPM
-XPMLIBDIR = $(USRLIBDIR)
-XPMINC = -I/usr/include/X11
+XPMLIBDIR = /usr/X11R6/lib
+XPMINC = -I/usr/X11R6/include/X11
#endif

XCOMM ****************
@@ -104,8 +104,8 @@

#ifdef USEJPEG
#ifdef USEINSTALLEDJPEG
-JPEGLIBDIR = /usr/local/lib
-JPEGINCDIR = /usr/include/X11
+JPEGLIBDIR = $(PREFIX)/lib
+JPEGINCDIR = $(PREFIX)/include
#else
JPEGLIBDIR = ../jpeg
JPEGINCDIR = $(JPEGLIBDIR)
@@ -134,7 +134,7 @@

DDNFSS = -DNFSS
DDLATEX2E_GRAPHICS = -DLATEX2E_GRAPHICS
-XCOMM DDEPSFIG = -DEPSFIG
+DDEPSFIG = -DEPSFIG

XCOMM ****************
XCOMM Comment out the DDDVIPS to NOT use dvips for the DVI-to-PostScript driver
@@ -158,11 +158,11 @@

#ifdef I18N
I18N_DEFS = -DI18N
-FIG2DEV_LIBDIR = /usr/local/lib/fig2dev
+FIG2DEV_LIBDIR = $(PREFIX)/lib/fig2dev
I18N_DEV_DEFS = $(I18N_DEFS) -DFIG2DEV_LIBDIR=\\\"$(FIG2DEV_LIBDIR)\\\"

install::
- [ -d $(DESTDIR)$(FIG2DEV_LIBDIR) ] || mkdir $(DESTDIR)$(FIG2DEV_LIBDIR)
+ [ -d $(DESTDIR)$(FIG2DEV_LIBDIR) ] || mkdir -p $(DESTDIR)$(FIG2DEV_LIBDIR)
$(INSTALL) -m 644 -c dev/japanese.ps $(DESTDIR)$(FIG2DEV_LIBDIR)
( cd $(DESTDIR)$(FIG2DEV_LIBDIR); \
rm -f ja.ps ja_JP.ps ja_JP.ujis.ps ja_JP.eucJP.ps ja_JP.EUC.ps; \
diff -ruN transfig.3.2.3d/fig2dev/dev/genepic.c transfig.3.2.3d-patched/fig2dev/dev/genepic.c
--- transfig.3.2.3d/fig2dev/dev/genepic.c 2000-07-11 17:50:28.000000000 -0400
+++ transfig.3.2.3d-patched/fig2dev/dev/genepic.c 2005-04-02 19:00:20.000000000 -0500
@@ -79,7 +79,7 @@
====================================================================*/


-#include
+#include
#include
#include "fig2dev.h"
#include "object.h"
diff -ruN transfig.3.2.3d/fig2dev/fig2dev.h transfig.3.2.3d-patched/fig2dev/fig2dev.h
--- transfig.3.2.3d/fig2dev/fig2dev.h 2001-01-12 17:12:09.000000000 -0500
+++ transfig.3.2.3d-patched/fig2dev/fig2dev.h 2005-04-02 18:59:27.000000000 -0500
@@ -186,12 +186,12 @@
#endif /* MAXPATHLEN */
#endif /* PATH_MAX */

-#ifndef __NetBSD__
+#if ( !defined(__NetBSD__) && !defined(__DARWIN__))
extern int sys_nerr, errno;
#endif

#if ( !(defined(BSD) && (BSD >= 199306)) && !defined(__NetBSD__) && \
- !defined(__GNU_LIBRARY__) && !defined(__FreeBSD__) && !defined(__GLIBC__))
+ !defined(__GNU_LIBRARY__) && !defined(__FreeBSD__) && !defined(__GLIBC__) && !defined(__DARWIN__))
extern char *sys_errlist[];
#endif

diff -ruN transfig.3.2.3d/transfig/Imakefile transfig.3.2.3d-patched/transfig/Imakefile
--- transfig.3.2.3d/transfig/Imakefile 2001-03-21 14:32:22.000000000 -0500
+++ transfig.3.2.3d-patched/transfig/Imakefile 2005-04-02 18:59:27.000000000 -0500
@@ -26,7 +26,7 @@
XCOMM \\usepackage{} command for LaTeX2e.
XCOMM The default is to use \\documentstyle{} for LaTeX209.

-XCOMM USELATEX2E = -DLATEX2E
+USELATEX2E = -DLATEX2E

XCOMM ******* DON'T CHANGE ANYTHIN BELOW THIS POINT *******

transfig323 _unstable_ port .patch